VERTICAL TURBINE PUMPS (VTP SERIES)
General Description (test)
VTP Type Long-axis Vertical Discharge Pump is mainly used for pumping sewage or waste water which are non corrosive, at the temperature lower than 60ºC and of which suspended substances are free of fibers or abrasive particles, content is less than 150 mg/L.
On the basis of VTP type Long-axis Vertical Discharge Pump. VTP type is additionally fitted with muff armor tubing with lubricant inside, serving for pumping of sewage or waste water, which are at the temperature lower than 60ºC and contain certain solid particles, such as scrap iron, fine sand, coal powder, etc.
VTP Type Long-axis Vertical Discharge Pump is of wide applicability in the fields of public work, steel and iron metallurgy, chemistry, paper-making, tapping water service, power station and irrigation and water conservancy, etc.
- Capacity: Up to 8000 m³/h
- Head: Up to 180 m.
- Pressure: Up to 2.5 MPa
- Temperature Range: -320ºC~ 110ºC
- Working Temperature: 0-60ºC
- Power: 1.5-3400 kW.
- Space Saving : Vertical arrangements saves valuable floor space.
- Self Priming: Submerged impellers allow pump to be started without priming.
- Low initial and operating cost.
- Low Operating Cost : High efficiency pump design, high reliability, result inlower operating cost.
- Low Maintenance : Flanged Bowls and column pipes for easier assembly–disassembly, perfect alignment.
- Petrochemical Industry Pump
- Seawater Desalination Plant or Salt Water Pump
- Municipal Engineering
- City Flood Control and Drainage
- Industry Plant
- Industrial Architecture
- Sewage Treatment Engineering
Vertical Turbine Pump Structure Advantage:
- The inlet shall be vertical downward and the outlet horizontal above or under the base.
- The impeller of pump is classified into enclosed type and half-opening type, and three adjustments: non-adjustable, semi adjustable and full adjustable. It is unnecessary to fill the water when the impellers are fully immersed in the pumped liquid.
- On the basis of Pump, this type is additionally fit with muff armor tubing and the impellers are made of abrasive resistant material, widening the applicability of pump.
- The connection of impeller shaft, transmission shaft, and motor shaft applies the shaft coupling nuts.
- It applies water lubricating rubber bearing and packing seal.
- The motor generally applies standard Y series tri-phase asynchronous motor, or YLB type tri-phase asynchronous motor as requested. When assembling Y type motor, the pump is designed with antireverse device, effectively avoiding reverse of pump.
Erik Pump_Vertical Turbine Pump_VTP Series
For more information, call +66 (0) 2-168-3193-5 #109 or add Line ID: @multiphase (available 24 hours a day)